The next-generation 52mm round display gauge.
Built for Haltech. Built for performance.
DESIGNED FOR PERFORMANCE
KrispyGauge drops straight into your existing 52mm gauge pod and delivers a full-colour round touchscreen — driven entirely by your Haltech ECU over CAN bus. Every channel. Real time. Zero compromise.
WHAT'S INSIDE
Six reasons KrispyGauge raises the bar for 52mm automotive gauges.
Full circular touch interface fills the 52mm bezel edge-to-edge. Control everything with a tap — no buttons, no clutter, clean install every time.
Programmable threshold alerts with full-screen visual warnings. Set limits for boost, temps, RPM — get alerted before damage can occur.
Configure KrispyGauge wirelessly over WiFi. Customise gauge face layouts, colour themes, and warning thresholds from any device.
Native Haltech protocol — no adapters, no config headaches. Plug into the CAN network and stream any channel from your Elite or Nexus ECU in real time.
KrispyGauge emulates a full Haltech CAN Keypad directly from its touchscreen — no separate keypad unit required. Every programmable function your Haltech ECU exposes is accessible right from the gauge face: engage launch control, switch traction maps, toggle pit limiters, cycle boost maps, activate anti-lag, and trigger any custom ECU function. One gauge. Total control.
Compatible with 12V electrical systems. Works in daily drivers, track cars, utes, or commercial vehicles — whatever you build, it fits.
NATIVE INTEGRATION
KrispyGauge speaks Haltech natively. Connect to any Haltech ECU's CAN network and instantly access every channel — RPM, boost, AFR, coolant temp, knock, fuel pressure, and more. No adapters. No configuration headaches. Just plug in and go.
KrispyGauge fully emulates a Haltech CAN Keypad over the CAN bus — meaning every programmable ECU function your Haltech supports is accessible directly from the 52mm touchscreen, without needing a separate keypad module wired into your car. Engage launch control, step through traction control maps, toggle anti-lag, switch fuel and ignition maps, arm the pit limiter, and trigger any user-defined ECU function — all from a single tap on the gauge face. The KrispyGauge appears to the Haltech ECU as a native CAN Keypad, so setup is instant and every channel responds exactly as it would from a physical keypad.
TECHNICAL DATA
| Form Factor | 52mm Round Gauge |
| Display | Full Round Colour Touchscreen |
| Interface | Touch-Only — No Buttons Required |
| CAN Protocol | Haltech Native (Elite / Nexus) |
| CAN Keypad Emulation | Supported ✓ |
| Wireless Connectivity | Configure over WiFi from any device at http://4.3.2.1 |
| Warning System | Programmable Thresholds + Full-Screen Alerts |
| Power Supply | 12V Compatible |
| Mounting | Standard 52mm Gauge Pod / Dash Panel |
GET YOURS
52mm · Haltech CAN Bus · Round Touchscreen